Xi żgħar dettalji dwar corrugated kaxxi!

1. The size of the corrugated box is divided inner size, manufacturing size, size, outer size, and the unit used to express them is generally mm.
2. Sticking/nailing: also known as lap tongue. In order to form the corrugated box and the extra part on one side of the box, the sticky/nail strip height is the same height as the corrugated box, and the the length is generally: nailing 35-40mm; Bonding {{{{30-35}mm.
3. Ħawwad cover: ukoll magħruf as E cover, divided in outer shake cover and inner shake cover. Generally, the long-sided rocking cover is placed outside as the outer rocking cover, li is is closed li is closed when folded; The wide-sided shake lid is placed inside as an inner rocking lid, li ma ma close when folded. According to the different lengths of the inner and outer rocking covers, corrugated boxes can be maqsum fi diversi tipi .
4. Box mark: the pattern and text printed on the corrugated box to explain the product name, quantity and size of the corrugated box. Il kontenut ta' il-kaxxa mark is determinat by the customer, and according to the position of printing, it can be divided into a positive mark, a side mark, a side mark, a positive mark printed in the long direction of the box, and a side mark printed in the a side mark printed in the wide direction of the box; If the contents printed on both sides of the long direction of the box are different, in order to distinguish, divide the positive mark in in a bar mark and a positive mark; The mark is the long direction connected to the nail strip, and the other side is the positive mark.
5. Slotting: il ftuħ bejn the shaking covers, the height is the same the height of the rocking cover.
6. Hand hold: also known as hand clasp. Generally, on the side of the corrugated box, the shape is often a rectangle with two rounded ends, the upper part of the straight beer is half worn, and the rest are all worn; The hand arm should be be determined ly the customer's requirements to determine the size and position, generally can not beer the pattern.
7. High and low lines: The high and low lines of the corrugated box mean that the crimping line of the inner and outer shaking covers of the corrugated box is not in the same straight line; The inner lid crimping line is about the inner lid crimping line is about the thickness of a sheet of corrugated paper than the outer rocking lid crimping line.
8. Post-press processing: the production process to make the printed product achievein the required shape and use performance.
9. Die qtugħ: azzar xfafar huma irranġati f'forom (jew minquxin f'forom ma azzar pjanċi) u frejms. Il proċess ta' irrumblar u biċċiet ta' karta f' a ċertu forma on a die-cutting machine.
10. Indentation: the use of steel wire, through imprinting, on the paper piece to press out marks or leave grooves for bending. It generally done by a die-cutting machine.
11. Bonding methods: commonly used bonding methods include bonding, self-locking, tape sealing, nailing, etc.